Skip to main content
Stesso

Dry and Reassemble Components

4:09
6:33
26.1K views

At 4:09 in

Mold In Front Loading Washing Machine!

Watch on YouTube

What happens here

After rinsing, place all cleaned dispenser components on a clean towel or drying rack to air dry completely. Ensure no water droplets remain in any crevices. Once dry, begin reassembling the individual compartments back into the main dispenser drawer. The video shows the pre-wash compartment sliding and clipping into place, followed by the bleach/softener compartment, and finally the liquid detergent insert, which simply sits inside the main detergent compartment. The process is described as similar to a jigsaw puzzle, with each piece fitting specifically into its spot.

Goal: The cleaned dispenser parts are air-dried and then reassembled by fitting the individual compartments back into the main drawer housing.

Tools and materials

  • Towel

What they say

Hide

lot better so we've got all this dried up ready to reassemble see you have to be able to access these little tabs right here so you just take this stick this right in here clips in place then we will take some free wash clips that in place like that it's like a little jigsaw puzzle so that goes back together like that this piece goes back on top of there like so this piece just sits down in there with the max on top this is for liquid only if you're gonna use powder you just remove that tray right you're gonna take this

Auto-generated from the video audio.