Apply Second and Third Coats

What happens here

Apply the second coat in the same manner as the first: roll a thin layer onto a small section of the wall, then immediately trowel it randomly to create texture. Work quickly because the product has a short working time. After the second coat dries for at least two hours, repeat the process for the third and final coat. Maintain a thin application to avoid excessive buildup and allow for proper drying and texturing. Be mindful of potential 'outgassing' (small bubbles forming) if drying times between coats are too short or if conditions are unfavorable. If outgassing occurs, it can be sanded down later.

Goal: Repeat the roll and trowel process for the second and third coats, working in small sections.