Skip to main content
Stesso

Reset Miter Saw and Clear Sawdust

0:13
1:27
25.5K views

At 0:13 in

Measure once cut 10👊

Watch on YouTube

What happens here

After cutting the 45-degree angle, return the miter saw blade to a 0-degree (straight) cutting position. Pull the saw blade down and lock it into its lowered position. Before proceeding, thoroughly clear any sawdust from the miter saw table and the fence to ensure accurate placement of the stop block.

Goal: Prepare the miter saw for attaching the stop block.

Tools and materials

  • Miter Saw Milwaukee FUEL — Resetting the blade angle and clearing the surface

What they say

Hide

around. I got you. Now, to make yourself a stop block, grab any size piece of wood that you have. Go ahead and just drop a 45 right in that corner. All right, so now that we have a 45 cut in this corner, we're going to zero out our saw again. So, go ahead, pull your saw down, lock it. You want to make sure there's no sawdust on the table or the fence before you do this. So, now take your stop block, put it on the table and your fence, and adjust it to how big you want your cut. So, in our case, we're going to do a 2-in block.

Auto-generated from the video audio.