Skip to main content
Stesso

Cut the Stop Block with a 45-Degree Angle

0:06
1:27
25.5K views

At 0:06 in

Measure once cut 10👊

Watch on YouTube

What happens here

To create the stop block, grab any piece of scrap wood. Place one end of this wood onto the miter saw table, ensuring it's positioned for a cut. Set the miter saw to a 45-degree angle and make a miter cut on one end of the scrap wood. This angled cut is a key feature of this specific stop block design.

Goal: Create a 45-degree angle on one end of the stop block material.

Tools and materials

  • Miter Saw Milwaukee FUEL — Making the 45-degree cut for the stop block
  • Safety Glasses — Eye protection during cutting operations
  • Scrap Wood — The material for the stop block

What they say

Hide

Do you need 10, 20, 30 boards all cut at the same length and you don't want to measure every single time? Well, stick around. I got you. Now, to make yourself a stop block, grab any size piece of wood that you have. Go ahead and just drop a 45 right in that corner. All right, so now that we have a 45 cut in this corner, we're going to zero out our saw again. So, go ahead, pull your saw down, lock it. You want to make sure there's no sawdust on the table or the fence before you do this. So, now take your stop

Auto-generated from the video audio.