Prepare Wires and Crimp Connector

What happens here

Begin by stripping approximately 1/4 to 1/2 inch of insulation from the ends of the two wires you wish to connect. Insert one stripped wire end into each side of a non-insulated butt splice connector. Using appropriate crimping pliers (though standard pliers are shown in the video for demonstration purposes, dedicated crimping tools are highly recommended for secure connections), firmly crimp the connector onto both wire ends. Visually inspect the crimps to ensure they are tight and the wires are held securely.

Goal: Strip the insulation from the wire ends and securely crimp them into a non-insulated butt splice connector to establish a solid electrical connection.