Inject Hot Sealant into Mold

What happens here

Once the crimped connection is properly seated, close the two halves of the SpliceSeal mold and secure them with a spring clamp. Then, use a specialized hot sealant injection tool (such as the SpliceSeal tool shown) to inject molten sealant through the designated port on the mold. Continue injecting until the cavity is completely filled with sealant, and some excess may begin to seep out, indicating full encapsulation.

Goal: Clamp the mold shut and inject hot, molten sealant into the mold cavity to fully encapsulate the wire splice, creating a waterproof seal.