Skip to main content
Stesso

Position Crimp in Mold

0:22
1:01
9.1K views

At 0:22 in

Made Your Own Weatherproof Electrical Connections! #diy #electrical #automobile #tools

Watch on YouTube

What happens here

Take the crimped butt splice connection and carefully position it within the open cavity of the specialized red SpliceSeal mold. Ensure that the crimped portion of the connector is centered inside the mold's chamber, with the wires extending out of the designated channels on both sides. The mold is designed to encapsulate the entire connection.

Goal: Place the newly crimped wire connection into a two-part specialized mold, ensuring it is properly centered within the mold's cavity.

Tools and materials

  • SpliceSeal Mold SpliceSeal

What they say

Hide

>> What we're offering is wiring connection protection. And the way we do it, we use a noninssulated butt splice connection like this. Crimp it on your wires. You can verify you got a good solid connection prior to it going into the mold. Place it in the mold and verify that it is centered. Clamp the mold, >> inject it with a hot sealant.

Auto-generated from the video audio.