Install Beadlock Rings and Inflate Tires

grease. Now I do this: I bait them all in turn. Sometimes they go tight because the ring is pressing on them or there is some dirt in the threads. This is natural for wheel parts. But I first bait them all by hand in a circle. Then I take this and pull them up. Not to the point of madness, without fanaticism. Just enough for them to just sit down. And then I take a torque wrench. I'm giving it a little effort, you know, gradually. I don't give the full moment at once, you need to do it one at a time so that everything is correct. I don't know. Do you understand what I mean? You do this in stages so you don't get all 22 foot-pounds at once. First, go through everything in a circle by 10, and then add. This way you don't over-clamp or deform the tire. It's such a smooth process. Now I'm doing this . Just finished with this side. Inflated the tire to 30 PSI. The village is just wonderful. I think the soap inside helped. Everything went, you know, smoothly, without any problems. I'll finish this side, and then move on