Diagnose Fan System Failure and Implement Temporary Fix
0:51
22:43
31.6K views
At 0:51 in
LSA Swap 1972 Monte Carlo: Tried Going to Dyno..What Happened? (Bonus Kasey Kahne Race Shop Tour!)
What happens here
After a short drive, the car overheats, and the owner discovers that the 30-amp fan fuse for fan 1 has blown. He realizes that despite trying to share the load between two fan outputs, the fans are not activating simultaneously, causing the fuse to pop. Lacking suitable relays for a proper fix, he bypasses the relay system and hardwires the fan directly to the battery using 10-gauge wire. This temporary solution aims to run the fan at low speed to prevent further overheating.
Goal: Identify fan failure cause and create a temporary cooling solution
Tools and materials
- 10-gauge wire — Used to directly connect the fan to the battery for a temporary fix
- 30-amp fuse — The blown fuse for the cooling fan
- Car — The vehicle experiencing the issue
- Pliers — For securing wire connections
- Wire cutters — For cutting the 10-gauge wire
What they say
(1,287 characters)Hide
What they say
(1,287 characters)Auto-generated from the video audio.