Cutting the Sink Hole

to to twist the right way. Okay, guys. This is where things get interesting and Frankie gets nervous. Don't you, Frankie? I don't like doing it. He does not like this part cuz it's a one shot. You got one shot to get it right. So, we're attempting to mount the sink. And when I say attempting, hopefully we will be successful. Okay, so let's take a look at the sink. It's a dual mount. Now, this is something you want going to want to be aware of. If you're going to mount the sink underneath, you're going to want the dual mount. And if you get a chance to get an open box, don't do it because you may not get the template. The template is really important. Now, we've actually marked off the dead center of the sink here in relation to where it's going to line up with the window with the cabinets below. Now, here's a bit of a challenge that we got. This thing is this is a live edge countertop, meaning it's not true and flat. So, it took forever to get this thing down so that it was actually flat, which you guys probably have seen and watched by this point. The sink should be mounted. The countertop should be flipped upside down to mount the sink. Right, Frankie? Yep. We should actually take this off, turn it upside down or mark mark our opening underneath to take it off, flip it upside down, mount our sink, mount our sink, but it's secured in place and it's anchored. I mean, it's anchored. It took forever to get it in place. So, we're going to attempt to do it the pol the Polish way. Yeah. All right, fingers [Music] crossed. Another thing to note is when Frankie is making his cut, he's cutting inside the line of the template, not outside. Because if you uh cut too wide, you can't go back with this. There's zero forgiveness. And if we're if we're too uh narrow, we can always sand our way out, right? Woohoo. Crawled, hammered, went at an angle. Okay. So, but we can do the same over here if we have to. Okay. So that's the that's part of the challenge for an undermount sink. You're going to see that, right? Well, so we Yeah, we can angle this. We can angle this side. We can match this side to that side. Yeah. You know. Yeah. We'll just have to fix that with sanding, right? Yep. And bonus, we got a breadboard out of it, right? Cool. Or fish cleaning station. Yeah. That's awesome. Yeah. Yeah, this blade must run in at an angle, but like I say, we'll just match this side and it'll be all right. Okay, so our sink cutout didn't go exactly the way we wanted it to, which is…