Clean Up Excess Glue Squeeze-Out

What happens here

As the clamps are tightened, you will observe wood glue squeezing out of the joint lines. This 'squeeze-out' is a positive sign of good glue coverage but must be cleaned immediately while still wet. Use a damp cloth to wipe away the excess glue from all exposed surfaces. For areas where a cloth cannot reach, such as inside corners or tight crevices, a small, pointed stick or scraper can be used. Prompt cleanup prevents the glue from hardening and creating an unsightly, difficult-to-remove residue that can show through stains or finishes.

Goal: Immediately remove any excess wood glue that squeezes out of the joint lines using a damp cloth or a pointed tool to prevent hardened residue from interfering with future finishing steps.