Skip to main content

Laying Out Angles with a Laser Level

0:48
1:19
97.8K views

At 0:48 in

Laser levels make leveling and layout a whole lot easier! #level #tools #home #diy #construction

What happens here

For tasks requiring specific angles, such as a 45-degree line, the presenter demonstrates a technique using a speed square. He places the speed square on the wall, aligns its bottom edge with a horizontal laser line, and then uses a piece of tape to mark the 45-degree angle projected by the square. To project the laser line along this angle, he puts the Milwaukee laser level into its 'ON' (locked pendulum) position. This 'locked' mode disables self-leveling, allowing the user to manually tilt the laser. He then tilts the laser level until its projected line perfectly aligns with the previously marked 45-degree angle, effectively extending that angle across the work surface.

Goal: Project specific angles (e.g., 45 degrees) across a surface

Tools and materials

  • Milwaukee Laser Level Milwaukee — Projecting lines and being set to manual tilt for angles
  • Speed Square — Marking a precise 45-degree angle
  • Painter's Tape — Marking the 45-degree angle on the wall

What they say

Hide

can make the line easier to see. If you need a 45° angle, you can put your square on there, line the bottom up with your line, draw a line, or take some tape, mark your 45, put your laser in the on and lock position, and just go ahead and tilt your laser till it meets that 45° angle. My square finds 45, and my laser extends it. Whether you're trying to level something, plumb something, lay out something, whatever

Auto-generated from the video audio.