Install New Hydraulic Filters and Re-attach Cover
17:06
22:43
132.5K views
At 17:06 in
KUBOTA VERSUS HAMMER...This fixed my sluggish diesel Side by Side!
What happens here
Take the new Kubota hydraulic filters (Part No. HHK32-16770 and HHK70-14073). Apply a thin layer of fresh hydraulic fluid around the rubber O-rings of both new filters. Hand-tighten each filter until snug, then use the 80mm, 15-flute cap filter wrench to give each an additional quarter turn. Re-attach the protective cover with the 12mm bolts and tighten them securely with the impact driver.
Goal: Replace the old hydraulic filters with new ones and secure the protective cover.
Tools and materials
- 12mm Socket DeWalt — Tightening bolts on the filter cover
- 80mm — Installing hydraulic filters
- Impact Driver DeWalt — Tightening bolts on the filter cover
- Kubota Hydraulic Filter — Replacing the old large hydraulic filter
- Super UDT2 Hydraulic Fluid Kubota — Lubricating O-rings and topping off fluid level