Access and Clean Hydraulic Filter Area
13:56
22:43
132.5K views
At 13:56 in
KUBOTA VERSUS HAMMER...This fixed my sluggish diesel Side by Side!
What happens here
The next maintenance item is to replace the two hydraulic filters. First, use a 12mm socket and an impact driver to remove the bolts securing the protective cover over the filters. Once the bolts are removed, slide the cover off. Wipe any dust or dirt from the filter area using a rag to prevent contamination.
Goal: Prepare the area for hydraulic filter replacement.
Tools and materials
- 12mm Socket DeWalt — Removing bolts from the filter cover
- Impact Driver DeWalt — Removing bolts from the filter cover
- Kubota RTV X1140 Kubota — The vehicle undergoing maintenance
- Oil Change Bin — Organizing tools and parts during maintenance
- Rag — Wiping dust and dirt