Install Sprayer Weight & Battery Pack

setup right here and so now we're gonna take this hose and we're gonna feed it back down in through there get that rolling we've got enough down there and so now we're gonna grab this weight it sounds like a maraca or something but we're gonna go through right here and get my hand out from that p-trap and then this piece just actually slides right in the bottom so you just push it up until it stops there's another little blue piece right here that i don't know what it looks like but it it works exactly for this you just take that and just this clips right in place like so and it allows it to where that's not going to be able to pull apart and so now you're able to take your sprayer and you're able to let it drop down and hang and you're pretty much good to go underneath here the only thing we have left to do is hook up the battery pack so on this outside cover it tells you which way the batteries are supposed to go and then in this thing right here as long as you have three going one way and three going the other you're going to be good shows right there on the top two how it goes in and then it just pops into place clips on you want to just kind of set this out of the way and so you can see over here that i kind of just set it up out off the floor too i've noticed that putting these on the floor sometimes like if there's a spill then you end up getting water in this case and that's not a good thing so i just like to keep it up a little bit off of something before we turn this on you can see if you touch this you can see that a light comes on right so we go ahead we open this up and