Attach New Faucet Mounting Hardware

it's going to be good so we're going to grab this package of stuff right here and it's going to have all the accessories to actually hold this faucet in place and so we're not going to end up using the the cover plate because we're going with a single hole option so you don't need these two things we're going to use this this is actually for the single hole mounting it's actually going to make this really nice and really easy and we're going to need this nut right here and delta actually comes with their own little wrench as well so we're going to be using this bad boy this is going to make putting it in just a little bit easier right it's better than trying to put my little adjustable jaw in there to tighten this up okay so you can see this right here it is all kinds of stuff going on so then the next thing you want to do is you want to find this piece right here this is actually to the sprayer and you want to pull that out so we're going to go up top and we're going to pull that sprayer hose out of there it's just gonna give you a little bit more room [Music] okay and so you have that out of the way now this makes this a lot easier to put on right so now you're able to just take this you want to go up here to this threaded piece and you just pop this on it just kind of holds around all these other pieces and just slips right up take this nut and do the same thing with it i like to get this on as much as i can with my fingers it seems to go a lot easier and then we'll just finish tighten it up with that little wrench they gave us and then we're going to go up top and make sure that everything's straight okay and so now that's kind of tight right we just want to make sure we get it positioned where we want it this piece right here actually has a gasket on it you don't need to put silicone or plumber's putty on there it's going to make a watertight seal and we're just going to go down below and we're going to finish tightening this up so then the next thing we're going to do is we're actually going to take our six in one phillips head and we're going to tighten down these two screws and when you tighten these two screws down it actually is gonna push on that brass adapter right there it's gonna push on that brass nut right there and it's gonna allow this thing to just really lock in place and we're going to rock and roll [Music]