Skip to main content
Stesso

Correcting Improper Cable Placement

0:00
1:03
19.7K views

At 0:00 in

Keep your wire 1.25” in

Watch on YouTube

What happens here

The video begins with the creator identifying a common wiring mistake: stapling electrical cable too close to the edge of a wooden stud. He explains that the National Electrical Code (NEC) requires electrical cable to be kept at least 1.25 inches from the edge of the stud. This distance is crucial to prevent drywall screws, which are typically 1.25 inches long, from piercing the cable during wall finishing. The creator then uses a hammer to remove the improperly placed staple, demonstrating the correction.

Goal: Ensure electrical cable is properly secured at least 1.25 inches from the stud edge.

Tools and materials

  • Electrical Cable — The wiring being secured
  • Hammer Unspecified — Removing improperly placed cable staples
  • Wood Stud Unspecified — The framing member where the cable is attached

What they say

Hide

There was thousands of you that caught my mistake in the last video, so let's fix it. And this right here is the issue. I stapled this wire way too close to the face of my stud. All it would take is for one drywall screw to slip and go right through. So, we want to make sure that this is set an inch and a quarter. But while we're here, let's talk about cable staples a little bit. If your box just has knockouts like this

Auto-generated from the video audio.