Prepare Trim Surfaces (Sanding and Deglossing)

What happens here

Before applying new paint, the existing semi-gloss latex trim paint surface must be thoroughly prepared. This involves a detailed inspection for any imperfections like nicks or dings. Any detected imperfections are sanded down. Then, these areas are filled with spackle to create a smooth, even surface. After drying, the spackle is sanded smooth using a 3M sanding sponge. Finally, to ensure optimal adhesion of the new paint, the entire trim surface is treated with a liquid deglosser, specifically Krud Kutter Gloss-Off, or a similar product like M1 Deglosser. This step ensures that the new paint will bind effectively to the old glossy surface, preventing peeling or poor finish. Alternatively, if a deglosser is not used, extensive sanding of all trim surfaces is required to create a rough enough profile for paint adhesion.

Goal: Ensure proper adhesion of new paint by preparing trim surfaces.