Remove Old Cooktop and Prepare New Conduit

you lifting this thing out now. So now here's our cook top. We're just going to close these doors right here. And now this thing these things are actually pretty light and they lift out pretty easily. Good idea to have two people lift this thing out. And so we're going to lift this one out. It's got a cracked top on it. So, there's some pieces of glass that might fall out, but let's just get our hands underneath it. And you might you might have to use some type of tool to get underneath it. You don't want to use a sharp tool that might crack it if you're don't want it to break any further. This one's already broken, so we're not worried about it. So, now we're just going to lift this thing out. Here's our connection. Just grab our connection. Set it aside. This thing's extremely light. I think it's probably no more than maybe 20 lb. So, now we're just going to move this thing out of the way and get our new one to reinstall. [Music] Now, we're getting ready to set this new unit. We got all the packing off it. We're going to set it right back into the hole that the old one came out of. The old one didn't have any supporting brackets on it or anything to um hold it down or cinch it down. Make sure you read the instructions in case there's supporting uh brackets for the model that you have that are required per code to actually install this thing. And and if there if you have to have them per code and it's going to be inspected, make sure those those supporting or mounting brackets are installed previous to setting this unit down. This unit was set into this concrete or this um granite slab without any brackets and support. And now we're just going to lift this. We lifted it out. We're going to be just reinstalling this new one in the the exact same way. Just going to measure quickly to make sure this is the identical unit, identical hole size before we attempt to put it in. So now we got our unit. We're just going to lift it up now. Turn it around where it's supposed to go. I'm going to drop my electrical conduit down there. And it just sits right in there nice and easily. Now we'll begin reconnecting our electrical connections. So, the new unit, the conduit, it didn't come with this elbow and this plate right here. So, we're just going to remove this cuz we're going to reuse it. Just has a nut that screws the elbow onto this base plate. So, we're just going to remove this nut. Remove this plate. And then there's just two screws that screw this elbow on. And…