Skip to main content

Access and Disconnect Old Cooktop Wiring

2:12
10:04
594.7K views

At 2:12 in

INSTALLING ELECTRIC COOKTOP. DIY Range or Stove Top Installation Instructions.

What happens here

Tools and materials

  • Flathead Screwdriver — Removing junction box cover screws and detaching wire nuts
  • Phillips Head Screwdriver — Removing junction box cover screws and detaching wire nuts
  • Electrical Tape — Insulating wire connections (will be re-applied later)
  • Wire Nuts — Securing wire connections (will be re-used or replaced)

What they say

Hide

here that we got to undo and take apart. So now we're got here's our stove top right here. If you look right over here, we've got our electrical connection. This conduit comes down and it's tied right into the wall there. The stove top comes with the electrical connections already connected and the conduit. So, we're just going to undo these connections right here. They just take a flathead or Phillips head screwdriver to undo them. And we're going to take a look at those connections. They should be just connected with some wire nuts. So, we're just going to loosen these connections right here to take a look at what we got going on behind our outlet right here. Our conduit is actually connected to the wall right here. So, I'm going to undo. There's just two Phillips head screws. Now, I can just pull my conduit out right here. And you can see there's just three connections. There's three wire nuts connecting this with um some electrical tape wrapped around them. I'll just take those apart and then we'll be able to just lift this cook top right out of here. So, here's a closer

Auto-generated from the video audio.