Setting the Pipe Grade
At 9:45 in
Installing Drainage Under The Patio!
What happens here
Accurately setting the grade is crucial for proper drainage. Use a grade laser/locator to ensure the pipe has a consistent slope, allowing water to flow by gravity towards the discharge point. The video shows workers using a yellow grade locator attached to a pipe to measure the elevation. For this system, the pipe needs to transition from approximately 8.5 inches of fall at the house to 12 inches of fall at the discharge end. This might involve placing wooden boards underneath the pipe to maintain the desired pitch. The video shows workers making small adjustments and checking the grade along the trench.
Goal: Establish a consistent downward slope for efficient water flow through the pipes.
Tools and materials
- Grade Laser/Locator — Measuring and verifying the slope of the pipe
- Measuring Tape — Measuring pipe elevation differences
- PVC Pipes — The main component of the drainage system being graded
- Shovel — Adjusting the trench base to accommodate the desired slope
- Wooden Boards — Supporting and leveling the pipes to achieve the correct grade
What they say
(1,091 characters)Hide
What they say
(1,091 characters)Auto-generated from the video audio.