Establish Power Source & Route Wiring
At 0:30 in
Installing 2 New Outdoor Outlets for a customer, what would you rate this install? #electrician
What happens here
Access the house basement to establish a power source for the new outdoor outlets. First, identify an existing junction box or circuit that can safely accommodate the additional load. Always turn off the power to that circuit at the main electrical panel and use a voltage tester to confirm it is dead before proceeding. Then, run 12/2 Romex wire from this tapped-off junction box through the basement ceiling joists and towards the exterior wall where the deck is located. This may involve drilling holes through joists or rim joists to route the wire neatly and securely.
Goal: Safely extend electrical wiring from the house's electrical system to the exterior deck area.
Tools and materials
- 12/2 Romex Wire — Providing electrical power from the basement to the outdoor outlets
- Drill — Drilling holes through joists or other wooden elements for wire passage
- Junction Box — The existing electrical box in the basement where the new circuit will be connected
- Ladder — Accessing overhead areas in the basement for wire routing
- Paddle Bit — Creating larger diameter holes for wire bundles or sheathed cable
- Voltage Tester — Confirming that the electrical circuit is de-energized before working
- Wire Strippers/Cutters — Cutting and preparing the ends of the Romex wire for connections