Skip to main content
Stesso

Adapters and Their Weaknesses

0:56
1:37
8.5K views

At 0:56 in

Impact driver or impact wrench

Watch on YouTube

What happens here

The video discusses adapters that allow impact drivers to use sockets (e.g., 1/4 inch hex to 3/8 inch square drive). These impact adapters are commonly found in 1/4 inch, 3/8 inch, and 1/2 inch sizes. A warning is given that the shank of these adapters is a weak point and is prone to failing under heavy load, unlike the much stronger anvil of an impact wrench.

Goal: Understand the use and limitations of impact adapters

Tools and materials

  • Impact Adapters — Demonstrating how they allow different bit types; also highlighting their weakness
  • Impact Driver Milwaukee M18 Fuel — Demonstrating how adapters can turn it into a pseudo-impact wrench

What they say

Hide

one, it's roughly 250 foot pounds. Now, there is an adapter for both of these that'll turn this one into an impact wrench. And of course, I don't have the adapter for this one. Impact adapters are most commonly found in three different sizes: 1/4 inch, 3/8, and 1/2 inch. Now, there is a weak point to these adapters, just like any adapter, the shank is prone to failing when under heavy load, as where it's a lot harder to break your anvil. If you're doing light duty fasteners or

Auto-generated from the video audio.