Measure and Install Subsequent Courses

1:58

9:49

992 views

At 1:58 in

I Turned Old Barn Wood Into a Garage Accent Wall

Watch on YouTube

What happens here

For each subsequent course, the creator uses a tape measure to determine the required length of the next barnwood plank. He stresses the importance of offsetting seams between rows to create a staggered, visually appealing pattern; he suggests cutting a longer board in half to achieve a 'short-long-short' sequence. When selecting planks, he prefers to expose the more weathered side of the barnwood for a richer aesthetic. Each measured and selected board is then securely nailed to the wall using the nail gun, and he periodically checks the level to ensure consistent alignment as he progresses upwards.

Goal: Continue covering the wall with barnwood planks, ensuring proper alignment and staggered seams

Tools and materials

Barnwood Planks — Covering the wall
Miter Saw Ridgid — Cutting planks to the desired length
Nail Gun Ridgid — Fastening the boards to the wall
Spirit Level — Periodically checking the level of installed planks
Tape Measure — Accurately measuring the length of each plank
16-gauge Finishing Nails — Securing the planks

What they say

(2,062 characters)

Hide

first course and work your way up. All right, now that we got our next board here, I'm just going to pull a tape and see how long that we need it. Looks like we need it right at about 66. Let's drop this board in here. Just like that, absolutely perfect fit. So, I want to make sure that these boards right here are lined up. So, I could go ahead and I could put a nail right in here. And then I want to level that backside. And I'm going to take my level, throw that on there, and then I'm going to raise this side up to see where it hits, where it needs to hit to level. Oh, and did we get lucky or what? We are right on the money. I mean, I got to come up maybe tad. I don't even want to come up that much. It is really raining outside right now. Geez. We're supposed to get storms, but I didn't know they were going to be this bad. But anyways, so I think we're going to go 6-in next and uh we want to make sure that we want to offset our seams. So, I'm either got to find a longer board or a shorter one. I think I'm going to cut one in half and do a a short, long, short. I think that'll look good. So, now this is like one of the most important parts of the whole build to me is honestly picking what side I want to do. I don't like where you can see there was like a the 2x4s that these are originally mounted on the barn or whatever. So, I think I'm going to go all this side, the outside of the barn. Um I like that more weathered look than uh you can tell where something was screwed to it. So, I don't know, it's just a little tip. It bothers me. Um I like to change up colors, get some grays in there. Um cut the board to where if I like a certain roughness or pattern. Really take your time with this stuff because the more time that you take, the better it turns out. So, I'm going to go ahead and throw this one up on the wall, make sure that it's level. All right, so we're about three rows in now. Everything staying straight, looking good. I'm going to continue up. I'll check back with you guys when I get about uh right here. All right, so I

Auto-generated from the video audio.