Skip to main content
Stesso

Install the First Course

0:58
9:49
992 views

At 0:58 in

I Turned Old Barn Wood Into a Garage Accent Wall

Watch on YouTube

What happens here

To ensure a straight and level installation, the first course of barnwood is crucial. First, the ends of a barnwood plank are cut clean using a miter saw. The plank is then placed tight against the bottom of the wall, and a spirit level is used to confirm its horizontal alignment. Once leveled, the board is secured to the wall studs using a nail gun loaded with 2.5-inch 16-gauge finishing nails. The creator emphasizes placing a nail into every stud to ensure maximum stability, reiterating that a perfectly level first course is essential for the entire wall's appearance.

Goal: Establish a level and secure base layer of barnwood on the wall

Tools and materials

  • Barnwood Plank — The initial board to be installed
  • Miter Saw Ridgid — Cleaning up the ends of the barnwood planks for a straight edge
  • Nail Gun Ridgid — Securely fastening the barnwood planks to the wall
  • Spirit Level — Ensuring the first board is perfectly horizontal
  • 16-gauge Finishing Nails — Attaching the barnwood planks to the wall

What they say

Hide

screw here. So I'm going to go ahead and I'm going to start my first course at the bottom and work my way up. Basically I'm going to take this board, lay it down, put a level on top, level this board, and then tack it in. But before I do anything, I'm going to take these butt ends to the miter saw, both of them, and just clean them up. All right, so once we got the board on the wall like this and we got our ends cleaned up, I'm going to go all the way tight to this wall. We want to level our bottom course and I'm just going to go ahead and put a couple nails in here. I'm using 2 and 1/2-in 16-gauge finish nails for this project. Now I'm going to go ahead and I'm going to pop a nail in every one of these studs. And that board is absolutely not going anywhere. Now when we put our second course on top of this, it should be level and we'll check level as we go, but it's most important to get this first course set before you build up cuz one little 1/4-in gap could turn into a whole wavy mess with gaps and a bunch of other stuff as you go. So level out your first course and work your way up.

Auto-generated from the video audio.