Skip to main content

RawMaxx Wingman Car Hauler Design and Customization

4:16
14:48
1.8M views

At 4:16 in

I can’t believe what this guy said….I had to walk away…

What happens here

Stanley engages with Wilmer from RawMaxx Trailers, who introduces the 'Wingman' car hauler. Wilmer highlights the trailer's distinct design, which eliminates the traditional rub rail and external tie-downs. Instead, it features an internal 'wing' that allows for customizable tie-down points (every 2 or 4 feet, or E-track every 2 inches) and working lights. The trailer is built on a 6-inch I-beam frame, but the reinforcing 'wing' design makes it as strong as a 10-inch I-beam, providing a lightweight yet robust structure. This design enables it to serve both as a car hauler and an equipment trailer, with options for higher clearance for off-road equipment or lower clearance (via drop axles) for street-use cars.

Goal: Wilmer from RawMaxx Trailers introduces the 'Wingman' car hauler, explaining its unique design that eliminates traditional rub rails and external tie-downs, reinforcing strength through a customizable internal 'wing' system.

Tools and materials

  • RawMaxx Wingman Trailer

What they say

Hide

keep looking around on the wingman well wilmer here is actually knows the truth wilmer how are you doing good good hey all right so tell me what you guys do different on this trailer so basically what we've been trying to do is get a trailer out there that looks different that when a customer walks in that sees that it's not just a typical normal trailer so basically we've eliminated the whole rub rail on the side so we got no rub rail no tie downs on the outside like you've seen you know all the trailers in years like 20 30 years that's been the normal trailer so we've designed a wing that you can customize all your tie-downs on the inside of the trailer so these you can position it every two feet every four feet at every six feet you can also change them out with a uh e-track that you can latch in your hooks anywhere you like at every two inches okay you can also customize all your working lights anywhere you want on the side wing it's designed on a six inch i-beam frame which is a light duty frame but the wing reinforces the eye view to where it's now just as strong as a 10 inch iv so as you can see this is sitting on a six-inch i-beam frame but the wing comes out so the wing creates the strength for the trailer frame so now you don't need that big frame for the 14 gbw but this is a dedicated car hauler this is less of a universal this is more of a if you're going to haul a car so it's a car hauler so this one's actually it has a higher um higher lift because they're going to use they're going to use it for both car haulers and equipment so for equipment you want a higher trailer because you're going to go off-road so if you want this specifically for cars what you're going to do is you're going to put drop axles on here so that you get that low rider car for street use okay so for equipment you're going to you're going to go with a higher clearance for cars you're going to go with your lower clearance so you can customize this for that okay and then also you don't have your normal ramps that you slide out lift and hook onto the rug rail so this one as you can see you just when you slide it out it has a stop yep yep oh you can't pull it out you

Auto-generated from the video audio.