Paver Laying and Cutting

What happens here

The worker begins laying the pavers by hand directly onto the leveled sand bed, following a pre-determined pattern (a herringbone pattern appears to be used here). A small board or straight edge is used to maintain straight lines. As the installation progresses towards the edges and around obstacles, pavers need to be cut to fit. An angle grinder equipped with a diamond blade is used for these precise cuts. Safety equipment such as ear protection, safety glasses, and a dust mask are worn during cutting due to the significant dust generated.

Goal: Pavers are carefully laid onto the screeded sand bed in the chosen pattern, with precise cuts made for edges and irregular shapes.