Construct Drawer Boxes with Pocket Holes

the drawers are going to be made out of half-inch maple plywood the bottoms of the drawers are going to be made out of quarter inch plywood you can use maple or birch it doesn't matter um the idea is they're gonna be eight inches tall not including the face frame that's gonna be obviously larger and then um they're gonna be 16 inches deep i got 16 inch long extendable uh drawer slides so we're to start just mass producing them right now so i'm going to start ripping everything on my table so i make sure everything is the same size and then at that point we're going to start securing everything with pocket holes so let's get to work [Applause] [Music] we need to create the channel for the bottom the the quarter inch bottom that's going to be the bottom of our drawers now uh in order to avoid using a dado stack instead i will take my regular blade which is an eighth inch wide i'm going to set it to a quarter inch in depth and then i'm going to make two passes 2 8 inches equals a quarter and that way that piece will sit flush inside of it so i'm just going to get everything set up straight got to be about i don't know half an inch off the bottom and then i'm going to create two passes per board and then we'll be able to assemble everything so let's get to work [Music] everything's rounded over like we promised and we're really glad we did it so now all we have to do is start cleaning all of these things up what i