Skip to main content
Stesso

Final Assembly and LED Installation

19:09
21:54
217.3K views

At 19:09 in

I Built our Daughter THE ULTIMATE Changing Table Dresser

Watch on YouTube

What happens here

Drill pilot holes into the top rails of the painted steel base. Carefully flip the painted wooden carcass over and align it with the steel base. Secure the carcass to the base using screws through the pre-drilled holes. Flip the entire assembly upright. Install the brass drawer pulls onto the painted drawer faces. Attach the slatted door to the cabinet using hinges. Finally, install LED strip lights (e.g., Govee Daylight White LED) along the interior edges of the open cabinet section to illuminate the storage area. Use rubber stoppers behind the slatted door to prevent direct contact with the painted surface when closed.

Goal: Attach the painted steel base to the painted wooden carcass, install drawer pulls, hang the slatted door, and integrate LED strip lighting.

Tools and materials

  • Brass Drawer Pulls
  • Changing Pad
  • Drill/Driver
  • Hinges
  • LED Strip Lights (Govee or similar)
  • Rubber Stoppers
  • Screws

What they say

Hide

okay so when it comes to installing i got my little kit here i got my screws then i'm just gonna flip the sucker over lay this over it and then just start securing and then flip it all together okay i'll be completely honest with you when i saw everything apart i wasn't too sure i'm gonna like this project but as soon as that bronze gold-bladed uh legs went on this green it oh a good feeling so far so i'm just happy to work now [Music] so i'm gonna start hanging this up and start making the final adjustments and start putting in led lights that wasn't as exciting as i thought it sounded and put on it led lights let's go and one thing i noticed is check this out well we don't have a stopper for it so solve that problem there's always something uh cut a little scrap piece of wood i'm gonna drill it underneath here and then put a couple of those little rubberized clear circular stoppers that you put you know in drawers to prevent them from banging up all the paint [Music] there we go all right so this is the led kit that i bought on amazon they're they're always different brands that i use but all of them were pretty faithful that's just instructions this is a strip for the most part they're all about the same get rid of that get that power source little mountain stuff okay so we're gonna start on the inside and work our way down

Auto-generated from the video audio.