Skip to main content
Stesso

Install Internal Dividers and Reinforcements

4:16
21:54
217.3K views

At 4:16 in

I Built our Daughter THE ULTIMATE Changing Table Dresser

Watch on YouTube

What happens here

Install the internal dividers and reinforcement pieces. For the reinforcement pieces that prevent sway, initially consider brad nailing and gluing. If access for brad nailing is obstructed, use a pocket hole jig to create pocket holes on the underside of the reinforcement pieces. Apply wood glue, position the pieces, and then secure them with pocket hole screws to ensure a sturdy and stable cabinet structure.

Goal: Install internal dividers and reinforcement pieces using wood glue and brad nails, incorporating pocket holes where brad nailing isn't feasible for structural integrity.

Tools and materials

  • Brad Nailer
  • Pocket Hole Jig
  • Pocket Hole Screws
  • Wood Glue

What they say

Hide

[Music] i was going to brag nail this and glue the reinforcement piece right here that way this thing doesn't sway side to side you know just make it stronger and i realized i can't really do brad nail i can brand new on this piece but i can't brag now this piece because it's in the way so i'm going to throw some pocket holes right here we've done pocket holes before you guys are experts in it so i'm going to go throw a couple of pocket holes just to be able to secure it through some wood glue and i think the base of our cabinet will be almost done well minus the veneer part well you guys get it right look at this beautiful

Auto-generated from the video audio.