Assemble Parts and Final Sanding

concealed as well attaching the top and bottom parts of this locking station is probably the hardest part mostly because of the awkward clamping pressure that's happening with this miter so the way I kind of tackled on that is using a glue which is the a6000 industrial adhesive and then this cool little jig from certified weld table and clamps plus where this little toggle clamp holds it in place and then I could set the angle exactly where it needs to be to match the base after the glue dries for 24 hours I finished off the second part of the sanding process and so with this we're using 300 400 5 and then 600 grit now the 45 and 600 I'm using these sanding spudgers from Woodcraft as well and they're really handy to do now at