Apply Anti-Seize and Grease Fittings

27:14

37:37

24.1K views

At 27:14 in

I bought a Simple plug and Play salter by Boss 4K

Watch on YouTube

What happens here

Before installation, Jacob explains the importance of applying high-temperature copper anti-seize to all stainless steel hardware used in the spreader. This prevents corrosion and seizing, especially critical in a salty environment. He then points out the two greasable zerks located at the front of the spreader, emphasizing the need for regular greasing (e.g., once a month during heavy use) to ensure smooth operation and longevity.

Goal: Prepare hardware for corrosion prevention and lubricate moving parts.

Tools and materials

Grease Gun — Applying grease to the zerks
High-Temp Copper Anti-Seize — Preventing corrosion and seizing of stainless steel hardware

What they say

(874 characters)

Hide

spreader Pro tip all right so Jake's up front there's a service panel up front and you Jake you were saying that so anytime you're working with stainless Hardware strongly advised especially in the salting industry to uh put antias on the threads especially CU these are nut zerks on this panel you get any gummed up salt in there and it'll actually wreck the bolt and then you're stuck without so now we're talking about the the greasing of this is there greaseable zerks up two zerks up front here these little green caps pop off gun right on here and how often do you grease it uh so it's kind of how much do you use it if you're using it all season every day I'd say at least couple once a month for sure you know if you're you it depends on the snow if you're only salt and sand and one once a month you're probably good for the season okay you have one in the back and

Auto-generated from the video audio.