Install New Teflon Packing

replace it so now to replace the the packing of the gun just want to make sure this gun is now it's all torn apart make sure you clean it extremely well black or thinner i like using acetone to clean my guns out this packing is just going to drop right in the back and it's going to have to just use your fingers to try to get it in there and get this packing to drop in there you know there's no front side or back side but they're just up and down so you kind of got to work it that's where your picks can come into handy you can grab a pick you can set that down there and i just dropped it right in there using my pick there's a lot of different shapes of picks in my kit right here and we have these things available at paint life supply now you're going to take your the packing nut i'm going to put this back in there this is where it kind of gets a little bit difficult but there's no easy way i'm trying to hold this trigger up and then i'm trying to drop that knot down inside there straight in once i get it straight i can start with my fingers and once again i'm trying it's not easy for me to do on and show on video but we'll try to get it in here best we can this technique this is a new technique i'm trying that's not working here i'll try to do it like this way oh my gosh there we go got it in there so now once your packing nut is in there and all the frustration is gone trying to balance that and get your fingers in there and twist that thing in now i'm going to take my 10 10 millimeter wrench and tighten this up now this is a very critical step and putting this packing in and tighten this nut you're going to cinch this up just until it pushes that packing in and seats it so not very tight at all i don't want to just tighten and wrench it down so this is a critical part so i'm tightening up and i feel that it's once i feel it's seated down in there i feel like it's seated now all right so now once you've get the