Skip to main content

Verify Verticality with Measurements

0:33
1:16
187.6K views

At 0:33 in

How to use a plumb bob

What happens here

With the plumb bob stabilized, measure the distance from the plumb line to the top of the object (e.g., a 2x4 wooden post). Then, measure the distance from the plumb line to the bottom of the same object. For the object to be perfectly plumb (vertical), both measurements should be identical. If the measurements differ (e.g., 1 and 1/8 inches at the top and 8 inches at the bottom as shown in the video), the object is not plumb and needs to be adjusted. The video demonstrates this by showing the post being adjusted to achieve equal measurements at the top and bottom (1 and 1/8 inches), and then verifying it with a level to confirm it's absolutely plumb.

Goal: Determine if an object is perfectly vertical (plumb) using a plumb bob and a tape measure.

Tools and materials

  • Level Empire — For a secondary verification of plumbness after adjustment
  • Plumb Bob — To establish a vertical line
  • Tape Measure Milwaukee — For taking measurements from the plumb line to the object
  • Wooden Post — The object being checked for plumbness

What they say

Hide

reference point, then just let gravity do the work and wait until the bob stops swinging. Now we can check if this board's actually plumb. First we'll measure from the top, inch and an eighth. The bottom, 8 in. We got to move this 2 by 4 quite a bit that way. Now that we straightened it out, our bottom should read inch and an eighth. And we can check it with our level and it's absolutely plumb. For most jobs I'm grabbing a level, but this is where a plumb bob really shines. Let's say I need to run this vent straight up through the roof. I can hang my plumb bob from the point I want it to come

Auto-generated from the video audio.