Final Checks and Tip Installation

seconds and then you can let go and then we always do a final check we make sure we're good on product we make sure we don't have any leaks around our hoses anything like that that we've got the pressure set to go now all we need we'll throw the tip on for whatever we're spraying and we're good to go there you have it how to operate an air to sprayer great explanation john what do you think reagan you think you can handle it now yeah pretty simple pretty straightforward so there you go a couple of things i was just telling reagan that are most important one make sure you've got the buckets that's pretty key and then where we see guys make mistakes is one they don't run enough product through when they're priming or bringing paint to the gun so you got to make sure you run that 10 to 20 seconds so there's no air in in the line and then just make sure your pressure's set where you need it to be those are kind of the three things that we're really looking for because what does that air in the line do the air in the line is going to create spit so it's going to be uh create clogs so you're you know especially using an extension you're going to get big spits you're going to have an erratic spray pattern or you're going to not have enough pressure if your paint has some debris or things in that it's not going to have enough pressure to throw the the stuff through the filter yeah even though you have an extension your extension is going to give you spits but having air inside the pump is going to give you a lot worse spits so there you have it hopefully you've enjoyed this video if you have please consider giving us a thumbs up right reagan right please consider subscribing to our channel hit the notification bell bam that way you get notified every time we come out with a new video sign us all john if you have questions comments we don't really care about the complaints throw those in the comments below and we will see you on the next video