Inspect and Secure Masking

What happens here

After applying all the tape and film, perform a thorough inspection of the entire masked window. Check carefully to ensure that no part of the window frame, especially the vinyl or glass, is exposed. If you find any small gaps or areas where the lines are slightly off, use small pieces of 3M 2020 masking tape to touch them up and create a complete seal. Pay close attention to all holes or potential leak points, as paint can seep through these when spraying. Finally, run your hand across the entire perimeter of the masked area to confirm that all tape and film are firmly tacked down.

Goal: Verify that the masked window is fully protected and sealed against paint.