Skip to main content
Stesso

Allow for Drying and Final Curing

6:32
8:38
623K views

At 6:32 in

How to stain a concrete driveway fast and easy

Watch on YouTube

What happens here

With both coats of stain applied, the crucial final step is to allow for adequate drying and curing time. Let the stained driveway and walkway dry for a minimum of two full days (48 hours) before allowing any foot traffic or driving vehicles over the surface. The presenter emphasizes that proper surface preparation, specifically ensuring the concrete surface is sufficiently 'rough' or porous, is vital to prevent future problems like peeling. If the surface isn't rough enough, an acid etching process may be necessary (though not required for this project).

Goal: Ensure the stained concrete is fully dry and cured before resuming normal use.

What they say

Hide

so there you have it our driveway and walkway is all stained now it's a very simple and easy process to do any professional painter or do-it-yourself or can do it it's very simple and easy to do one thing you want to make sure is if it isn't rough enough or Prep properly you're going to have problems so make sure it's rough enough it if it isn't rough enough you got to go through an acid etching process and I got videos to show you how to acid that it's not very hard to do at all we didn't have to do that we just used a power was and an all surfice cleaner and cleaned it got it ready to go and then the next day we went through the staining process not very hard just got to roll it on and we did two coats and it was easy to do let it dry for 2 days and then we can

Auto-generated from the video audio.