Skip to main content
Stesso

Cure Resin and Scrape Excess

7:32
11:11
10K views

At 7:32 in

How to repair a cracked/chipped windshield under $15..Farm stuff, GUNFIRE! and A RANT!!

Watch on YouTube

What happens here

Once the 20 minutes of pressure application are complete, carefully remove the syringe applicator and the adhesive pedestal from the windshield. Take the clear curing film from your kit and place it directly over the repaired area, ensuring it covers all the applied resin. Position the vehicle in direct sunlight for approximately one hour. The sun's UV rays will cure and harden the resin. After curing, use a safety razor blade or a sharp scraper (the presenter improvises with vice grips and a scraper blade) to carefully scrape off any excess cured resin from the windshield surface.

Goal: Harden the resin and remove any protruding material for a smooth finish.

Tools and materials

  • Clear Curing Film Bullseye kit component — Covering the resin during UV curing
  • Safety Razor Blade or Scraper — Removing excess cured resin from the windshield
  • Vice Grips — Used by the presenter as a handle for the scraper blade

What they say

Hide

so the next part of the instructions says to take a safety razor and remove this little object from the window I don't have a safety razor but a tick a pair of vise grips and scraper and a [ __ ] get it up we'll take our syringe off set it over here and basically said all you had to do is get it started and it'll peel right up it's just kind of the case then take the razor scrape off the excess take this little clear film it's almost clear and you drop a drop of the resin put a little drop on there and we'll take that and press it on the window and we give it about an hour depress it on the window so guys we got

Auto-generated from the video audio.