Skip to main content
Stesso

Clean Prime Tube

3:16
7:43
140.9K views

At 3:16 in

How To Properly Clean or Repair A Paint Sprayer. Titan Spray Painting.

Watch on YouTube

What happens here

If you ran paint through the prime tube (often used for initial priming), it must also be cleaned. Hold the prime tube over a dirty bucket and set the sprayer to prime. Run clean water through the prime tube until it runs clear. This ensures no paint dries and clogs this line.

Goal: Run clean water through the prime tube into a dirty bucket to clear any paint from it.

Tools and materials

  • Airless Paint Sprayer (Titan 440i)
  • Dirty Bucket
  • Prime Tube
  • Clean Water

What they say

Hide

out at the idaho.com. And then one last thing, you got to check your prime tube right here. If you actually ran paint through this prime tube, you're going to run clean water through that to clean that also. So, I'm going to hold on to this. Make sure you hold on to your prime tube cuz if you put this thing to prime, all that pressure behind here is going to throw that prime tube up in there and it's going to shoot paint everywhere. So, I'm going to take turn it down. You can see it running out. There was paint in it. Now I'm going to flip it back to spray. Then I'm going to run some back through the gun again. And I'm going to keep rotating this process back and forth. Run some through the prime tube, run some through the

Auto-generated from the video audio.