Alternate Gun and Prime Tube Flushing

the prime tube, run some through the gun. And I actually like to actually let this thing set for about five minutes. And I actually come back and then I'll run it for about 10 to 15 seconds. and then I'll go off do another task then I'll walk come back cuz what happens is the clean water inside this line helps dissolve the paint and then it just instead of sitting here and running it and running it running it and using your pump and wearing out your pump you're actually just letting the water dissolve the paint inside the line and then it'll flush out a lot easier. So, I'm going to go off, do something, do some painting, do some uh cleaning up on my job site. Then I'll come back, cycle it through the gun, and then I'll cycle it through my pine tube. And another thing I like to do is actually like to lift my paint intake, lift it up, and when once you start to see pure clean water come out of this tube, you know your sprayer is almost clean. So, I'm going to run it a little more. I'm just going to alternate this process back and forth until I see pure clean water come out of here and pure clean water come out of there. When I lift this thing up right here, once I get