Skip to main content
Stesso

Initial Deep Cleaning and Degreasing

1:30
10:24
409.3K views

At 1:30 in

How to paint a shower or bathtub.

Watch on YouTube

What happens here

Begin the initial cleaning process by spraying a concentrated cleaner and degreaser, specifically Crud Kutter, generously over the entire surface of the fiberglass shower. Once applied, use a scouring pad, such as a Scotch-Brite pad, to vigorously scrub all areas. This step is essential for removing embedded dirt, soap scum, body oils, and any other contaminants that could hinder paint adhesion. Ensure all corners, edges, and the floor of the shower are thoroughly scrubbed.

Goal: Remove all contaminants and degrease the shower surface for optimal paint adhesion.

Tools and materials

  • Crud Kutter — Degreasing and cleaning the shower surface, Scouring Pad Scotch-Brite

What they say

Hide

prepping this. So, the first step in this process, they actually gave us in the kit, they gave us some steel wool and some cleaner. But what I'm going to actually do to start this off with, I'm going to use some crud cutter. This is a concentrated cleaner degreaser right here. I'm going to use the CRUD cutter with just a scouring pad. I've got a scouring pad right here. This is an actual Scotbrite Scotchbrite pad also. We're just going to use these to begin the cleaning process first. Heat. [Music] So, we had a shower door on here that we removed the shower door and it had silicone cocking. And you want to make

Auto-generated from the video audio.