Skip to main content
Stesso

Prepare and Bend EMT Conduit

2:08
8:52
17.3K views

At 2:08 in

HOW TO INSTALL A TESLA WALL CONNECTOR ANYWHERE! THE EASY WAY!

Watch on YouTube

What happens here

The installer begins preparing for the Electrical Metallic Tubing (EMT) conduit run. He measures and marks the conduit pieces, then uses an offset bender (referred to as a 'little kicker') to create small bends for clearances. A standard conduit bender is used to create a 90-degree bend in the conduit, essential for routing it along the wall and out of the garage. He emphasizes the efficiency of specialized bending tools for electricians.

Goal: Shape EMT conduit to fit the desired path

Tools and materials

  • Band Saw Milwaukee — Cutting conduit to length
  • Conduit Bender — Creating 90-degree bends in conduit
  • EMT Conduit — Protecting electrical wires and routing them along surfaces
  • Offset Bender — Creating small, precise offsets in conduit
  • Pencil — Marking cut and bend locations on the conduit
  • Tape Measure — Measuring conduit lengths

What they say

Hide

tail in. And now prepping for my EMT run. So here guys, what it looks like, you know, prep for EMT. I'm using an offset bender guys. And this is called a little kicker. I highly recommend if you're a service electrician to get a little kicker. Um I could use a regular bender, you know, and do my offsets manually, but this little kicker is nice. It's a speed demon. Really gets your installs done way faster. And I'm now using a conduit bender for my 90° on the wall. Using my level to make sure

Auto-generated from the video audio.