Skip to main content
Stesso

Locate Studs and Mark Layout

0:58
10:08
96.8K views

At 0:58 in

How to Frame Garage Third Bay Wall

Watch on YouTube

What happens here

Using a stud finder, the creator scans the existing garage wall to locate the vertical studs within the drywall. He marks the center of each stud with a pencil. He also checks the ceiling for overhead joists or trusses that can be used as anchor points for the top plate of the new wall. He identifies an existing taping line on the ceiling that aligns with a stud, which he'll use as a guide for the top plate, confirming structural support for anchoring. He emphasizes the importance of anchoring the new wall securely at the top, bottom, and into the existing wall to prevent movement.

Goal: The first step in construction is to accurately locate the existing studs in the garage wall and ceiling using a stud finder. Once located, these points are marked with a pencil to serve as anchor points for the new partition wall.

Tools and materials

  • Pencil
  • Stud Finder

What they say

Hide

we're gonna do it so first order of business I want to find the stats that are in the swab because I want this wall to be anchored top bottom and into the wall here I don't want to cut any corners so first things first let's grab our step behind a pencil and Mark out where everything is so if you're an inspector or you do this for a living please be nice in the comments below come on man we're all learning let's go all right so we got our stuff found on the wall turns out there's a line like a nice crisp taping line that goes completely to the top from the stud here to the trusses and so I knocked out a little bit seems like it's an actual you know stud or trust going completely across so we're gonna trust that's our line this is our line so now all we got to do is find a completely linear line on the concrete so our walls don't warped let's see let me show you the tool that I got for so this is what I have I have this little laser it's a it's a little X plus looking sine laser it's really great because we're gonna put it on the ground it's gonna self-leveling do that in there we're gonna put the ground it's gonna shoot a laser beam on the ceiling on the wall and on the ground and it's gonna allow us to find the perfect 90 square so let's see what we can do with it okay so we found our lines on the wall we found the lines on the ceiling and right now we just established our line on the ground this is not a piece of pressure-treated lumber but it's a long piece so I'm gonna lay it down and I'm gonna use my sharpie or chalk if you

Auto-generated from the video audio.