Clear Ball Valve Debris

lower fluid section and you'll actually see a ball up inside there. And you'll typically I've actually seen blades of grass in between that ball not passing through there. I've seen little tiny sticks up inside there, but most commonly uh thin pieces of film breaking free from that hose. And then you just reach up inside there. I use just like a little tiny flathead screwdriver. Anything that will reach up inside there. Sometimes a five in one can grab it. Or you can just use a little pair of needlenose pliers. Reach up inside there. The needle-nose pliers is actually long enough to touch that ball and actually grab anything, keeping that ball from receating down and allowing paint to pass and not pass properly. And you'll just get that whatever's debris is in there that's causing your issue. Pull it out. You're going to stick your prime, you're going to stick your fluid hose back on and it should cure your problem. And I'll show you what that ball looks like here closely. We'll get