Skip to main content
Stesso

Load Paint and Prime the Sprayer

1:28
7:22
301.9K views

At 1:28 in

Graco Ultra Handheld Paint Sprayer Test & Review

Watch on YouTube

What happens here

To prepare the sprayer, first unscrew the cup from the sprayer unit. Inside, you'll find a soft plastic liner. Pour your paint product (or demonstration liquid like the colored water shown) directly into this liner. After filling, screw the cup back onto the sprayer, ensuring it's sealed. Then, switch the sprayer to the "prime" setting and hold it for a second until the small 'site cup' on the side fills with liquid. This indicates the pump is sufficiently primed and ready to spray.

Goal: Prepare the sprayer for operation by filling and priming

Tools and materials

  • Prime/Spray Switch Graco — Engaging the priming mechanism
  • Soft Plastic Liner Graco — Containing the paint within the cup for easy cleanup
  • Sprayer Cup Graco — Holding the paint product
  • Paint Product Any paint brand — The substance to be sprayed

What they say

Hide

But all you do, I'm just going to show you how easy it is to load this thing up. You just unscrew this. This is where your paint goes. And it has these right here. This is a liner right here. It's just a soft plastic liner. And your product goes inside this liner right here. I got some food coloring and some water right here. I got to just use water and not paint because I'm inside my studio right here. I don't want to spray paint up there. Got just some food coloring. It just goes in that cup. Just going to load this thing up. And all you do to operate this thing is once it's loaded up, it has a little sight thing right here that you fill it up. You're going to squeeze this thing. I got some water in it from using it just a minute ago. So, I'm going to squeeze it. And as soon as that little sight cup fills up with your paint or your liquid, in this case, it's just water. Just filling it up. And now, once it's filled, you just close this lid, lock it. Now, it's airtight. Now, all you got to do is just stick it to prime. Hold it for a second at high

Auto-generated from the video audio.