Skip to main content

Continuous Concrete Cutting Test (Gas Saw)

12:42
15:39
17.1K views

At 12:42 in

Full throttle! Makita 80V Chopsaw VS GAS!

What happens here

For direct comparison, the assistant performs another continuous cutting test on multiple stacked concrete blocks using the gas-powered Makita MM4 cut-off saw. This test is conducted similarly to the battery-powered saw test, with an external water supply. The gas saw also performs well, completing numerous cuts until its water supply is depleted. This side-by-side demonstration aims to show that the battery-powered saw can match the performance of a traditional gas saw even under prolonged heavy use.

Goal: Compare gas saw cutting capacity and performance under continuous load.

Tools and materials

  • Diamond Cut-Off Blade Makita — Attached to the saw for cutting concrete
  • Safety Glasses — Eye protection during cutting
  • Water Supply System Makita — Providing water for wet cutting
  • Concrete Blocks — Material to be cut

What they say

Hide

[Music] and then when our water supply finally ran out we decided that would be a good time to check and see how well our batteries are doing [Music] all right so let's com got one two three four five 6 7 8 nine 10 11 12 13 14 15 16 17 18 19 20 21 one X3 all right let's see how we did there you go now you know exactly how many Cuts he can make well I was also pushing it too I wasn't really babying it either 2 we did we we did 21 Cuts here yeah and then we did four or five over on that end over on that end and burying the saw into the stone and all that other stuff and whatnot so yep that's a pretty good run time I'd say on batteries that's not too bad I would definitely say and it comes with four batteries so now as these charge up yeah

Auto-generated from the video audio.