Skip to main content

Connect Refrigerator Water Line

10:02
12:01
1.5K views

At 10:02 in

Full Kitchen Sink Replacement part 2...installing sink, faucet, and garbage disposal

What happens here

Tools and materials

  • Brass Stiffener
  • Faucet Escutcheon (Split Ring)
  • New Compression Nut
  • New Plastic Ferrule
  • Pipe Cutter
  • Pliers
  • Poly Water Line (1/4 inch)
  • Mega Lock Thread Sealant

What they say

Hide

new line to the fridge tomorrow. Today, we're going be hooking up the fridge line right here. So, I'm using plastic discussions, but what I'm going to do is I'm going to raise this up, take some of my caulk from yesterday, and I'm actually just going to go right around this whole thing. action. No rust, no mus. We're not going to have any issues. Cut this quarterinch polyline. Going to put on a new knot, a new plastic fereral with the bevel side up. I'm going to put in a brass stiffener inside of this to make sure that when you tighten down the fereral, it the pipe doesn't collapse on itself. Like any other fereral, I'm always going to put just a little bit of Megalock around it there. Once it's handtight, just give it a little bit more. About one full turn, maybe a turn and a half. Slowly open this quarter turn. Oh. All right. Let's do that a couple more times. A lot of air in that water. Check back here one more time. Check under here one more time. The faucet

Auto-generated from the video audio.