Skip to main content

Mark Lumber Widths (3.5 inches and 5.5 inches)

1:08
1:42
1.9K views

At 1:08 in

Framing square Friday

What happens here

This step demonstrates how to achieve a 3.5-inch mark, which is the actual width of a 2x4. By first marking 1.5 inches using the tongue (as shown in the previous step), and then flipping the square and adding an additional 2 inches using the width of the body (blade), a total width of 3.5 inches can be laid out. Similarly, by adding another 2 inches to the 3.5-inch mark, a 5.5-inch mark can be achieved, which is the actual width of a 2x6. These measurements are crucial for accurate wall framing.

Goal: Use the framing square to mark 3.5-inch and 5.5-inch lumber widths.

Tools and materials

  • Framing Square Unspecified — Used for measuring and marking
  • Pencil Unspecified — Marking lines on the lumber
  • Lumber — Demonstrating layout techniques

What they say

Hide

as a 2 by 4, 2 by 6, 2 by 8. That 2 is an inch and a half. Now, if you flip it and you add 2 in to your inch and a half, you have 3 and a half. Which is your width of a 2 by 4. Now, if you go ahead and you add another 2 in to that, you have 5 and a half, which is the width of a 2 by 6. Being able to quickly measure inch and a half and 2 in will help you with layout when it comes to

Auto-generated from the video audio.