Skip to main content

Kill Power and Remove Outlet

0:20
1:09
15.3K views

At 0:20 in

Fixing recessed electrical boxes. #DIY #Electrical #HomeImprovement #DIYTips #HomeRenovation

What happens here

Before beginning any work, the most critical step is to ensure safety by turning off the power to the circuit at the electrical breaker panel. Once the breaker is off, use a non-contact voltage tester, such as the Klein Tools NCVT-1, to thoroughly verify that there is no power present at the outlet. After confirming the outlet is de-energized, use a power drill, specifically a Milwaukee M12 Fuel Impact Driver is shown, to remove the two screws that hold the electrical outlet in the box.

Goal: Safely disconnect power to the outlet and remove it from the wall.

Tools and materials

  • Electrical Outlet — The electrical device being removed and reinstalled
  • Non-contact voltage tester Klein Tools — Verifying that the electrical outlet has no power
  • Power drill/driver Milwaukee — Removing the screws holding the electrical outlet

What they say

Hide

If you didn't plan ahead, or your box is already installed and you don't want to take it out, you can go ahead and get these box extenders. They make them in all different widths. Depending on the thickness of your extension, you're going to need to get new screws. First thing you got to do, kill the breaker and verify the outlet doesn't have any power. Take the screws out of your outlet. Once you have the outlet out, you can go ahead and pull these screws out of here. Now you can take your outlet extender right over the top. Take your new screws, put them here in the top, and screw them

Auto-generated from the video audio.