Skip to main content
Stesso

Safety and Initial Diagnosis

1:03
2:20
167.9K views

At 1:03 in

Emergency Service Call, Customer has an Arking 100 AMP Circuit Breaker, What do you do? Thoughts?

Watch on YouTube

What happens here

Before proceeding with any diagnostic tests, the electrician must don appropriate personal protective equipment (PPE), including face protection and utilizing a rubber mat for insulation. Once protected, a visual inspection of the arcing circuit breaker will be performed, checking for any visible signs of popping, crackling, or other anomalies. Subsequently, a voltmeter and an ammeter will be used to accurately measure the voltage and current to understand the electrical conditions contributing to the arcing.

Goal: Safely diagnose the cause of the arcing circuit breaker.

Tools and materials

  • Ammeter Fluke — Measuring current flowing through the circuit breaker
  • Face Protection — Protecting the face from arc flash and electrical hazards
  • Rubber Mat — Providing electrical insulation from the ground
  • Voltmeter Fluke — Measuring voltage across the circuit breaker

What they say

Hide

flooring because I want to make sure I'm safe. So, after I do that, I'm going to establish give a diagnosis and then we're going to go from there. Okay, that's not bad, but I was looking for a little bit more detail. What I wanted you to do is, yes, I'm going to pull in. I'm going to be very professional cuz I know I'm on camera. I'm going to welcome greet everybody. Guard shack, happy Thanksgiving. I'm going to ask for the maintenance people. Okay. Once I get to that breaker, I'm going to do a visual inspection. If I see that there's

Auto-generated from the video audio.